Re: [CAD_CAM_EDM_DRO] Bijor Oiler pressure
Posted by
Sven Peter, TAD S.A.
on 2001-05-30 21:35:59 UTC
Hello Lee,
On the mill I work with for 2 years readings were 80 PSI dropping slowly to 40 PSI and there the pressure stayed stable for quite a
while.
I assume that the dosifiers have a specific resistance.
On other machines I noticed that the different size bijur dosifiers have different resistances so that the low flow dosifiers might
let pass less oil in a mixed set up.
Hope this helps
Sven Peter
Lee Studley wrote:
On the mill I work with for 2 years readings were 80 PSI dropping slowly to 40 PSI and there the pressure stayed stable for quite a
while.
I assume that the dosifiers have a specific resistance.
On other machines I noticed that the different size bijur dosifiers have different resistances so that the low flow dosifiers might
let pass less oil in a mixed set up.
Hope this helps
Sven Peter
Lee Studley wrote:
> Hello,[Non-text portions of this message have been removed]
> If anyone has a Bijor oiler with a pressure meter on the line, I'd
> like to knokw typical pressures for a Bridgport mill.
> Thanks,
> Lee
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
Discussion Thread
Lee Studley
2001-05-30 13:54:44 UTC
Bijor Oiler pressure
Joe Vicars
2001-05-30 14:43:47 UTC
Re: [CAD_CAM_EDM_DRO] Bijor Oiler pressure
Lee Studley
2001-05-30 16:59:22 UTC
Re: Bijor Oiler pressure
Sven Peter, TAD S.A.
2001-05-30 21:35:59 UTC
Re: [CAD_CAM_EDM_DRO] Bijor Oiler pressure