way wipers
Posted by
Sven Peter, TAD S.A.
on 2001-06-01 20:57:58 UTC
Hello George and friends.
George gave me a few weeks ago the tip to buy Kabelschlepp way wipers
for a machine I had to rebuild. Today I got the Kabelschlepp BAS 18
wipers
out of customs. What a beauty!!!!!!!!!!!!
Marvellous stiff aluminium profile with replaceable polyurethane
profiles.
On the first sight you see that these wipers are made to last.
The PU-profile has a kind of spring to hold down the nose, which is
covered with an alu shield against hot chips and it seals even the back
so that no soluble oil enters in the ways..
I will put still a 1/2" * 1/8" flat aluminium strip to the back and
adapt there some felt to reoil the ways.
They are really their money worth. For the wiper 29$ per meter and 7$
per meter of the replacement PU-profile.
Thank you very much for this tip George.
Regards to Linda.
Good Luck to everybody
Sven Peter
[Non-text portions of this message have been removed]
George gave me a few weeks ago the tip to buy Kabelschlepp way wipers
for a machine I had to rebuild. Today I got the Kabelschlepp BAS 18
wipers
out of customs. What a beauty!!!!!!!!!!!!
Marvellous stiff aluminium profile with replaceable polyurethane
profiles.
On the first sight you see that these wipers are made to last.
The PU-profile has a kind of spring to hold down the nose, which is
covered with an alu shield against hot chips and it seals even the back
so that no soluble oil enters in the ways..
I will put still a 1/2" * 1/8" flat aluminium strip to the back and
adapt there some felt to reoil the ways.
They are really their money worth. For the wiper 29$ per meter and 7$
per meter of the replacement PU-profile.
Thank you very much for this tip George.
Regards to Linda.
Good Luck to everybody
Sven Peter
[Non-text portions of this message have been removed]
Discussion Thread
Sven Peter, TAD S.A.
2001-06-01 20:57:58 UTC
way wipers
Tim Goldstein
2001-06-01 21:17:11 UTC
RE: [CAD_CAM_EDM_DRO] way wipers
Sven Peter, TAD S.A.
2001-06-01 21:32:22 UTC
Re: [CAD_CAM_EDM_DRO] way wipers
Tim Goldstein
2001-06-01 21:41:53 UTC
RE: [CAD_CAM_EDM_DRO] way wipers
Sven Peter, TAD S.A.
2001-06-01 22:57:55 UTC
Re: [CAD_CAM_EDM_DRO] way wipers