Re: [CAD_CAM_EDM_DRO] ball screws
Posted by
Doug Harrison
on 2001-06-05 18:55:34 UTC
We just got a quote from Rockford Ballscrew today. You can't beat their
price for preloaded nuts. Then get the screws from McMaster if you want to
save a cut charge. The Rockford tech admitted they are interchangable.
I presume you will be able to use the 5/8 diameter by .200 pitch screw.
This and the one inch size are less than half the price of any other size.
Their phone: 1-800-475-9532 or
www.rockfordballscrew.com
Doug
price for preloaded nuts. Then get the screws from McMaster if you want to
save a cut charge. The Rockford tech admitted they are interchangable.
I presume you will be able to use the 5/8 diameter by .200 pitch screw.
This and the one inch size are less than half the price of any other size.
Their phone: 1-800-475-9532 or
www.rockfordballscrew.com
Doug
----- Original Message -----
From: <blueveil@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Tuesday, June 05, 2001 8:07 PM
Subject: [CAD_CAM_EDM_DRO] ball screws
> Does anyone have a good source for ballscrews for an Enco
> Mill-Drill.
> Any help would be greatly appreciated.
>
> Ed.
>
>
> Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems, for CAD, CAM, EDM, and DRO.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
> FAQ: http://www.ktmarketing.com/faq.html
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
Discussion Thread
Les Watts
1999-11-17 06:27:13 UTC
Re: ball screws
Joel Jacobs
2000-06-19 09:12:12 UTC
ball screws
Carlos Guillermo
2000-06-19 10:55:05 UTC
RE: [CAD_CAM_EDM_DRO] ball screws
JanRwl@A...
2000-06-19 18:40:26 UTC
Re: [CAD_CAM_EDM_DRO] ball screws
ptengin@a...
2000-06-19 20:56:03 UTC
Re: [CAD_CAM_EDM_DRO] ball screws
Jon Elson
2000-06-19 21:59:43 UTC
Re: [CAD_CAM_EDM_DRO] ball screws
Joel Jacobs
2000-06-20 07:24:02 UTC
Re: [CAD_CAM_EDM_DRO] ball screws
blueveil@e...
2001-06-05 17:07:44 UTC
ball screws
brian
2001-06-05 17:44:34 UTC
ball screws
Doug Harrison
2001-06-05 18:55:34 UTC
Re: [CAD_CAM_EDM_DRO] ball screws