Re: CNC questions
Posted by
terr@m...
on 2001-06-08 17:58:36 UTC
I recently picked up a Bridgeport BTC 1. I have all kinds of factory
service information. I know of another shop that uses one for
production work. It is actually very reliable, but the owner wants me
to retrofit it with a pc control.If I can be of any help let me know.
Terry
service information. I know of another shop that uses one for
production work. It is actually very reliable, but the owner wants me
to retrofit it with a pc control.If I can be of any help let me know.
Terry
--- In CAD_CAM_EDM_DRO@y..., paul@a... wrote:
> Hi Jon,
>
> Fitch thought you might know something about this.
>
> I've tripped onto a deal for a Bridgeport BTC-1 machine with
> toolchanger with a Boss 7.1 control. Do you know anything
> about that machine or control?
>
> There may be a glitch in the controller. The story I'm getting
> is it worked fine in service, the current fellow got it and
> fiddled with the tool changer and it hasn't really worked since.
>
> I was looking for an EMC candidate (actually, that's not quite
true, I
> was _going_ to look for an EMC candidate - when I had the room for
it.
> Figuring out what to do with this thing now is a problem). I will
> probably go take a look at it in a couple of weeks (it's about 400
> miles away). The fellow wants $1500 for it, including some tooling,
> which seems like a good deal if it's in decent condition.
>
> Thanks for any info
>
> Paul
>
> --
> Paul Amaranth | Rochester MI, USA
> Aurora Group, Inc. | Systems & Software
> paul@A... | Unix / Windows / NT
Discussion Thread
Tom Eldredge
2001-06-06 13:05:09 UTC
Gecko E-Stop recommended configuration
mariss92705@y...
2001-06-06 15:10:59 UTC
Re: Gecko E-Stop recommended configuration
Tom Eldredge
2001-06-07 08:55:38 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko E-Stop recommended configuration
mariss92705@y...
2001-06-07 09:19:50 UTC
Re: Gecko E-Stop recommended configuration
Jon Elson
2001-06-07 22:29:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko E-Stop recommended configuration
paul@a...
2001-06-08 04:18:26 UTC
CNC questions
Tom Eldredge
2001-06-08 11:56:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko E-Stop recommended configuration
terr@m...
2001-06-08 17:58:36 UTC
Re: CNC questions
Jon Elson
2001-06-08 18:24:07 UTC
Re: [CAD_CAM_EDM_DRO] CNC questions
Jon Elson
2001-06-08 18:30:01 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko E-Stop recommended configuration
Larry Van Duyn
2001-06-08 20:22:53 UTC
Re: [CAD_CAM_EDM_DRO] CNC questions
Tom Eldredge
2001-06-10 17:58:21 UTC
Re: [CAD_CAM_EDM_DRO] Re: Gecko E-Stop recommended configuration