Re: [CAD_CAM_EDM_DRO] Re: Advice please on CNC Mill

i have download demo version of Bobcad 17. it is not loading or opening 3D
drwing in DXF format. I have Acad 14 for drawing.
i have Millvizerd for tool path. it is opening 3D drawings and genrating
toolpath. All toolpath in G-Code but all toolpath is in G01. There is no
G02 or G03 for arc or circle.why it is ?
any one knows about it?
Shabbir



****************************************************************************
*****At 09:26 AM 6/20/01 +0000, you wrote:

>For CAM your best bet is something like BOBCAD or Vector that are
>very affordable and offer support and training and are used in many
>professional shops. Lots of great deals on Vector and BOBCAD these
>days too.
>
>
>--- In CAD_CAM_EDM_DRO@y..., Mark Fraser <mfraser@h...> wrote:
>> Instead of the usual "how much for a ....", we'll start with:
>>
>> Given budgets of 3000, 6000, 10000, 15000, 20000
>> What would people on the list recommend for a CNC'd mill?
>> Should probably include software, or a controller able to generate
>> toolpaths.
>>
>> And let's talk relatively small workpiece, as opposed to a kazillion
>> cubic feet. Buyer wants accessible training, support, parts. He
>> had an Emco-Maier CNC5 lathe that the maker has abandoned, so
>> perhaps leave that brand off the list.
>>
>> Thanks /mark
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>