Re: Stepper Controller Questions

John,

Yes, put the power supply in the same case. You want the wires from the
power supply to the drivers to be as short as possible. On most commercial
drivers they will specify to maximum distance.

I use a 110V fan and it does make some noise, but not as much as my Porter
Cable router.

Bob Campbell

----- Original Message -----
From: John Ross <johnr@...>
To: <CAD_CAM_EDM_DRO@onelist.com>
Sent: Tuesday, September 21, 1999 10:36 AM
Subject: [CAD_CAM_EDM_DRO] Stepper Controller Questions


> From: John Ross <johnr@...>
>
> I've put together one of Dan's 5amp boards. Now I'm mounting it in a 19"
> rack mount case with lots of room. Am I crazy to try and mount the power
> supply in the same case? If not what kind of shielding would this
require?
> Does a 110v AC fan make too much noise or should a I track down a 12v or
24v
> DC fan?
>
> John Ross
> I-Link Worldwide
>
>
>
> > Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
> To Unsubscribe, read archives, change to or from digest.
> Go to: http://www.onelist.com/isregistered.cgi
> Log on, and you will go to Member Center, and you can make changes there.
> For the FAQ, go to http://www.ktmarketing.com/faq.html
> bill,
> List Manager
>