RE: [CAD_CAM_EDM_DRO] emc help with home

EMC thinks your home switch is already tripped. Go into the .ini file and
change the HOME_SWITCH_POLARITY

BTW, It was Paul Corner of the UK that put together the BDI. I am sure that
Ray had some input as he has become very involved in the development of EMC,
but it was Paul that took on the task and made it happen.

Tim
[Denver, CO]

> -----Original Message-----
>
>
> Finally got emc up and running thanks to ray henrys bdi install.now I
> dont know how to home an axis. If I hit the home, the axis twitches
> and the display goes to 0, in essence working like a zeroing button.
> I understood that the axis is supposed to slowly home toward the
> limit switch and then back up a little. the home switches are mounted
> and the i/o checks out fine
>
> the system is a metric sherline with steppers. all other aspects
> work except the home feature. any help is appreciated
> Bill H
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>