Re: [CAD_CAM_EDM_DRO] Square tube bending- thanks

Joe;
I think that yuo have a job in your hands, I believe that
the best way without heavy machinery is to make a jig
(must be strong) and fill the tube with sand and heat the
tube as the curve is very close
let me know how you are doing
regards
mariano

----- Original Message -----
From: <jvicars@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, July 20, 2001 11:56 AM
Subject: [CAD_CAM_EDM_DRO] Square tube bending- thanks


> thanks for all the help on tube bending. The first several were done
> by kerfing, a tedious process.
> I am bending 1.5" by 2" by .125" rectangular tube. 3" radius bend up
> to 90 deg.
> Thanks to all for advice.
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>