Re: [CAD_CAM_EDM_DRO] Square tube bending- thanks

I have a ccess to a hydraulic bender, just don't have dies for square tube.

Thanks


diazden wrote:

> Joe;
> I think that yuo have a job in your hands, I believe that
> the best way without heavy machinery is to make a jig
> (must be strong) and fill the tube with sand and heat the
> tube as the curve is very close
> let me know how you are doing
> regards
> mariano
>
> ----- Original Message -----
> From: <jvicars@...>
> To: <CAD_CAM_EDM_DRO@yahoogroups.com>
> Sent: Friday, July 20, 2001 11:56 AM
> Subject: [CAD_CAM_EDM_DRO] Square tube bending- thanks
>
> > thanks for all the help on tube bending. The first several were done
> > by kerfing, a tedious process.
> > I am bending 1.5" by 2" by .125" rectangular tube. 3" radius bend up
> > to 90 deg.
> > Thanks to all for advice.
> >
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
> >
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/