Re: [CAD_CAM_EDM_DRO] Re: g-code to dxf

hi
when u load a G-code file in text format into G-code 95. it draws a drawing
according to ur gcode text file but it also use machine system confugration
file . it called as *.ini files. (e.g. fanuc.ini, 5ddecal.ini, gcode.ini,
edm.ini, wire.ini, laser.ini and plasma.ini) u can found these files in
gcode95. now u can save this drawing in DXF format.
any *.ini files changs ur drawing in same gcode text.

shabbir


**********************At 01:11 AM 7/26/01 +0000, you wrote:

>--- In CAD_CAM_EDM_DRO@y..., "M. SHABBIR MOGHUL" <shabm@d...> wrote:
>> it is G-CODE 95 or ver 2000.
>> it converts any g-code file into DXF.
>> shabbir
>
>Shabbir-
>
>Are you sure G-CODE 95 can go FROM g-code TO dxf? I didn't see any
>mention about that in the product description. Unfortunately, I
>haven't been able to download the program, as the download fails
>about half-way through.
>
>> Depending on how complex it is, Vector CAD/CAM can import Gcode
>> into a drawing, and then you can export it as DXF.
>> Alan KM6VV
>
>Allen-
>
>Oh well, I missed the boat on the low cost VectorCAD offer. I knew
>that there was a program that could do it, just couldn't recall which
>one it was.
>
>Thanks for the help, Shabbir and Allen.
>
>Tom Murray
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>