Re: Question fro Jon Elson
Posted by
dlm00738@j...
on 2001-07-26 19:42:06 UTC
I just want to reinforce the beryllium warning. The dust is
extremely carcinogenic and can cause "berylliosis" which is a serious
lung disease. How do I know? We often use it at work because it is
has the highest stiffness to weight ratios of almost any material,
but we never ever machine or sand it ourselves, even though we have
an entire machine shop with its own dedicated building. We always
send it out to a shop which has better respiratory protective
equipment. Be sure check the MSDS on your material and be very
careful in any handling of beryllium and its alloys.
Don
extremely carcinogenic and can cause "berylliosis" which is a serious
lung disease. How do I know? We often use it at work because it is
has the highest stiffness to weight ratios of almost any material,
but we never ever machine or sand it ourselves, even though we have
an entire machine shop with its own dedicated building. We always
send it out to a shop which has better respiratory protective
equipment. Be sure check the MSDS on your material and be very
careful in any handling of beryllium and its alloys.
Don
Discussion Thread
mdickey@b...
2001-07-26 06:15:57 UTC
Question fro Jon Elson
Jerry Kimberlin
2001-07-26 06:59:31 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 10:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Fitch R. Williams
2001-07-26 10:42:30 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 11:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
mdickey@b...
2001-07-26 11:25:25 UTC
Re: Question fro Jon Elson
thscarince@h...
2001-07-26 12:13:12 UTC
Re: Question fro Jon Elson
Alan Marconett KM6VV
2001-07-26 12:24:37 UTC
Re: Question fro Jon Elson
Doug Harrison
2001-07-26 15:23:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
brian
2001-07-26 18:37:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
dlm00738@j...
2001-07-26 19:42:06 UTC
Re: Question fro Jon Elson
Jon Elson
2001-07-26 20:23:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Chris Stratton
2001-07-27 06:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Carlos Guillermo
2001-07-27 06:22:05 UTC
EDM spark control system
Weyland
2001-07-27 06:31:03 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Marcus & Eva
2001-07-27 07:55:51 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
thscarince@h...
2001-07-27 08:18:37 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 11:14:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-27 11:34:27 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Scott M. Thomas
2001-07-27 13:20:26 UTC
RE: [CAD_CAM_EDM_DRO] EDM spark control system
scott@d...
2001-07-27 13:38:57 UTC
Re: Question fro Jon Elson
mdickey@b...
2001-07-27 14:55:12 UTC
Re: Question fro Jon Elson
Larry Edington
2001-07-27 15:16:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Carlos Guillermo
2001-07-27 17:23:34 UTC
Re: EDM spark control system
Tom Murray
2001-07-27 19:52:13 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 23:26:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Jon Elson
2001-07-27 23:39:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Tim Goldstein
2001-07-27 23:59:40 UTC
Temperature of a brushed servo motor?
Larry Edington
2001-07-28 01:11:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-28 06:04:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
info.host@b...
2001-07-28 07:01:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
mariss92705@y...
2001-07-28 15:46:09 UTC
Re: Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:14:07 UTC
Re: [CAD_CAM_EDM_DRO] Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:25:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
brian
2001-07-28 18:01:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:09 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system