Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Posted by
Jon Elson
on 2001-07-27 23:26:50 UTC
scott@... wrote:
http://pico-systems.com/edm.html
R1 and C2 are the R and C of the spark generating circuit. When the
capacitor charges up to the voltage needed to break down the dielectric
in the tiny space between work and electrode, a high current discharge
develops for a few microseconds or so, discharging the cap until the
discharge can no longer be sustained. then, the process repeats.
When it works well, there is a steady but rough buzz, about a hundred
sparks per second. But, RC EDM systems are slow and very temperamental.
I think an electronic switching system would vastly improve things.
This is what is done in all commercial EDM systems.
Jon
> Will you give us details of your RC EDM circuit? I would like to seeHere's a link to a complete description of what I set up :
> how it works.
http://pico-systems.com/edm.html
R1 and C2 are the R and C of the spark generating circuit. When the
capacitor charges up to the voltage needed to break down the dielectric
in the tiny space between work and electrode, a high current discharge
develops for a few microseconds or so, discharging the cap until the
discharge can no longer be sustained. then, the process repeats.
When it works well, there is a steady but rough buzz, about a hundred
sparks per second. But, RC EDM systems are slow and very temperamental.
I think an electronic switching system would vastly improve things.
This is what is done in all commercial EDM systems.
Jon
Discussion Thread
mdickey@b...
2001-07-26 06:15:57 UTC
Question fro Jon Elson
Jerry Kimberlin
2001-07-26 06:59:31 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 10:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Fitch R. Williams
2001-07-26 10:42:30 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 11:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
mdickey@b...
2001-07-26 11:25:25 UTC
Re: Question fro Jon Elson
thscarince@h...
2001-07-26 12:13:12 UTC
Re: Question fro Jon Elson
Alan Marconett KM6VV
2001-07-26 12:24:37 UTC
Re: Question fro Jon Elson
Doug Harrison
2001-07-26 15:23:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
brian
2001-07-26 18:37:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
dlm00738@j...
2001-07-26 19:42:06 UTC
Re: Question fro Jon Elson
Jon Elson
2001-07-26 20:23:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Chris Stratton
2001-07-27 06:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Carlos Guillermo
2001-07-27 06:22:05 UTC
EDM spark control system
Weyland
2001-07-27 06:31:03 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Marcus & Eva
2001-07-27 07:55:51 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
thscarince@h...
2001-07-27 08:18:37 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 11:14:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-27 11:34:27 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Scott M. Thomas
2001-07-27 13:20:26 UTC
RE: [CAD_CAM_EDM_DRO] EDM spark control system
scott@d...
2001-07-27 13:38:57 UTC
Re: Question fro Jon Elson
mdickey@b...
2001-07-27 14:55:12 UTC
Re: Question fro Jon Elson
Larry Edington
2001-07-27 15:16:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Carlos Guillermo
2001-07-27 17:23:34 UTC
Re: EDM spark control system
Tom Murray
2001-07-27 19:52:13 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 23:26:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Jon Elson
2001-07-27 23:39:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Tim Goldstein
2001-07-27 23:59:40 UTC
Temperature of a brushed servo motor?
Larry Edington
2001-07-28 01:11:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-28 06:04:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
info.host@b...
2001-07-28 07:01:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
mariss92705@y...
2001-07-28 15:46:09 UTC
Re: Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:14:07 UTC
Re: [CAD_CAM_EDM_DRO] Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:25:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
brian
2001-07-28 18:01:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:09 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system