Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Posted by
brian
on 2001-07-26 18:37:16 UTC
Hi, yea watch the beryllium,it is poisonous,check with a chemist before
using ber/coper stuff. We used to machine the stuff and i know if you grind
it and breath the dust it will poison you! cul brian f.
using ber/coper stuff. We used to machine the stuff and i know if you grind
it and breath the dust it will poison you! cul brian f.
----- Original Message -----
From: <thscarince@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Thursday, July 26, 2001 3:12 PM
Subject: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
> Ah Ha!
>
> Out of curiosity I searched McMaster-Carr to see if they might have
> copper hex stock (electrode by the foot!). They don't, but they do
> carry *beryllium* copper hex wrenches for non-sparking applications.
>
> No idea if the beryllium would be a problem...
>
> BTW, I was captivated by Jon's junkbox EDM setup! Is that really all
> there is to it? Does EDM require short pulses or a continuous arc
> like a welder? Does polarity matter? How about AC? What properties
> are make a good electrode material?
>
> Any good links for the real nitty-gritty theory of EDM?
>
> Tom Scarince
>
> > > > I wonder if a hex shaped path could be programmed to cut a
> > > > hole through the stud for an allen wrench to extract it.
> > >
> > > You can EDM about any straight sided shape. The electrode shape
> > > can be sunk into the metal. Thus, if you have a hex shaped
> > > carbon/copper electrode, the EDM will produce that shape. No
> > > programming needed.
> >
> > For a one-off, you could even use an old allen wrench as the
> > electrode!
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Discussion Thread
mdickey@b...
2001-07-26 06:15:57 UTC
Question fro Jon Elson
Jerry Kimberlin
2001-07-26 06:59:31 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 10:31:15 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Fitch R. Williams
2001-07-26 10:42:30 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
Jon Elson
2001-07-26 11:06:06 UTC
Re: [CAD_CAM_EDM_DRO] Question fro Jon Elson
mdickey@b...
2001-07-26 11:25:25 UTC
Re: Question fro Jon Elson
thscarince@h...
2001-07-26 12:13:12 UTC
Re: Question fro Jon Elson
Alan Marconett KM6VV
2001-07-26 12:24:37 UTC
Re: Question fro Jon Elson
Doug Harrison
2001-07-26 15:23:27 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
brian
2001-07-26 18:37:16 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
dlm00738@j...
2001-07-26 19:42:06 UTC
Re: Question fro Jon Elson
Jon Elson
2001-07-26 20:23:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Chris Stratton
2001-07-27 06:09:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Carlos Guillermo
2001-07-27 06:22:05 UTC
EDM spark control system
Weyland
2001-07-27 06:31:03 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Marcus & Eva
2001-07-27 07:55:51 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
thscarince@h...
2001-07-27 08:18:37 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 11:14:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-27 11:34:27 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
Scott M. Thomas
2001-07-27 13:20:26 UTC
RE: [CAD_CAM_EDM_DRO] EDM spark control system
scott@d...
2001-07-27 13:38:57 UTC
Re: Question fro Jon Elson
mdickey@b...
2001-07-27 14:55:12 UTC
Re: Question fro Jon Elson
Larry Edington
2001-07-27 15:16:33 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Carlos Guillermo
2001-07-27 17:23:34 UTC
Re: EDM spark control system
Tom Murray
2001-07-27 19:52:13 UTC
Re: EDM spark control system
Jon Elson
2001-07-27 23:26:50 UTC
Re: [CAD_CAM_EDM_DRO] Re: Question fro Jon Elson
Jon Elson
2001-07-27 23:39:07 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Tim Goldstein
2001-07-27 23:59:40 UTC
Temperature of a brushed servo motor?
Larry Edington
2001-07-28 01:11:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
Ian Wright
2001-07-28 06:04:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
info.host@b...
2001-07-28 07:01:46 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
mariss92705@y...
2001-07-28 15:46:09 UTC
Re: Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:14:07 UTC
Re: [CAD_CAM_EDM_DRO] Temperature of a brushed servo motor?
Jon Elson
2001-07-28 16:25:29 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
brian
2001-07-28 18:01:55 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:09 UTC
Re: [CAD_CAM_EDM_DRO] EDM spark control system
M. SHABBIR MOGHUL
2001-07-28 23:52:31 UTC
Re: [CAD_CAM_EDM_DRO] Re: EDM spark control system