CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] G-code problem

on 2001-07-30 10:54:58 UTC
Hi Al,

Vector CAD/CAM can import DXF's, but not the CAD-only vers. If you have
a simple file with polylines, and possibly another one with splines, I
or someone could try an import into Vector CAD/CAM and let you know how
it goes (I seem to be digging into DXF's at the moment)!

To learn Vector, follow all the examples in the fine manual (print it
out if you need to), and get the feel for how each line is a vector,
I.E., has direction as well as a pair of endpoints. Kinda like thinking
of your "cuts" as you go along. I enjoy it!

Alan KM6VV
(Amateur CNC Machinist)


alenz@... wrote:
>
> I have a part that includes a splined line. Ace converter will not
> read polylines or splines. And I just found out that Autocad will
> not explode splines. Can the spline be converted to a polyline
> and then exploded? (Not that I know of) Or what is the work around
> for this? I do have the raw data that created the spline. Also have
> Vector (took advantage of Fred's offer), but haven't invested the
> time to learn how to use it yet. (It's very different from any CAD
> package that I have any experience with). If it will do what I
> want, however, it will certainly be worth it!
>
> Thanks for any help,
> Al

Discussion Thread

alenz@c... 2001-07-29 19:22:43 UTC G-code problem Scott A. Stephens 2001-07-29 19:34:18 UTC Re: [CAD_CAM_EDM_DRO] G-code problem alenz@c... 2001-07-29 19:57:01 UTC Re: G-code problem Carol & Jerry Jankura 2001-07-29 20:24:08 UTC RE: [CAD_CAM_EDM_DRO] G-code problem Rich D. 2001-07-29 20:54:40 UTC Re: [CAD_CAM_EDM_DRO] G-code problem alenz@c... 2001-07-29 21:54:05 UTC Re: G-code problem IMService 2001-07-30 03:59:12 UTC Re: Re: G-code problem Alan Marconett KM6VV 2001-07-30 10:54:58 UTC Re: [CAD_CAM_EDM_DRO] G-code problem Carol & Jerry Jankura 2001-07-30 11:29:59 UTC RE: [CAD_CAM_EDM_DRO] G-code problem Alan Marconett KM6VV 2001-07-30 11:44:50 UTC Re: [CAD_CAM_EDM_DRO] G-code problem Art Fenerty 2001-07-30 12:36:03 UTC Re: [CAD_CAM_EDM_DRO] G-code problem