CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Encoder options

Posted by Doug Harrison
on 2001-08-11 17:31:47 UTC
> A better approach would be to put a differential driver on a tiny PC board
> right at the encoder, and use a differential receiver at the Gecko.
> The AM26LS31 and 32 devices were the original chips for this purpose,
> but there are now some chips like the 75ALS191 series that are better.

US Digital sells differential line drivers. A separate power supply is
still required because the Gecko will only provide 50ma, but the idea makes
sense.

Doug

Discussion Thread

Doug Harrison 2001-08-11 13:34:51 UTC Encoder options Jon Elson 2001-08-11 14:35:51 UTC Re: [CAD_CAM_EDM_DRO] Encoder options Doug Harrison 2001-08-11 17:31:47 UTC Re: [CAD_CAM_EDM_DRO] Encoder options Doug Harrison 2001-08-11 19:36:45 UTC Re: [CAD_CAM_EDM_DRO] Encoder options vrsculptor@h... 2001-08-11 20:08:14 UTC Re: Encoder options Doug Harrison 2001-08-11 20:54:23 UTC Re: [CAD_CAM_EDM_DRO] Re: Encoder options