Re: [CAD_CAM_EDM_DRO] EDM fluid

Hi,

I have heard of people successfully using a mixture of 50% Glycol (car
antifreeze) and 50% water.

Ian
--
Ian W. Wright
Sheffield UK
www.iw63.freeserve.co.uk

----- Original Message -----
From: "M. SHABBIR MOGHUL" <shabm@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: 19 August 2001 03:23
Subject: Re: [CAD_CAM_EDM_DRO] EDM fluid


> HI
> u are right. in here Pakistan all edm users are using kerosine still. but
> mostly dont care it. some body have fire in night when machine was on auto
> and there was nobody. 2 edm and 2 wire edm was burned in this fir. i want
> to use or make a dielectric flude for this. we are very sorry for the
those
> have fire.
>
>
> shabbir
>
>
>
> At 08:30 AM 8/17/01 -0500, you wrote:
> >Shabbir I have used Kerosene for year in EDM work and never hand a
> >problem. Most of the Ram type fluids, except for the synthetic fluids,
> >are basically Kerosene with some additives. Kerosene was used for year
> >in the U.S. and to a very large extent still used in South America
> >today. It is low cost and readily available in most parts of the world.
> >I know this is in direct opposition to other comments on this list. It
> >works and with a little care can be used in your application. If in
> >question keep a fire extinguisher close at hand and know where the off
> >switch is on the power supply.
> >
> >Ben
> >
> >
> >
> >Addresses:
> >FAQ: http://www.ktmarketing.com/faq.html
> >FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> >Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> >Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> >Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> >List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> >Moderator: jmelson@... timg@... [Moderator]
> >URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> >bill,
> >List Manager
> >
> >
> >
> >Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
> >
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>