Re: [CAD_CAM_EDM_DRO] Servo motor HP for Bridgeport

Does u. stepping and chopping mean voltage is lost making the signals for
the motors? What is the difference between the 201 and the 210 that makes
the 201 $199? I saw the 201 has 10u. stepping (What is the 10 for?) and that
the 210 makes the motors run like they're being microstepped using frequency
multiplying, does that mean the 210 isn't a true microstepper? To make a 210
a 201 all you need do is whip out a board, the multiplier, would the
multiplying version put less stress on the controllers and make the motors
run smoother because it's not actually having to microstep properly? Why
does it cost more for something that's got less in it?

John H.

> That is for stepper motors using microstepping and a chopper drive. For
> servos you don't want to exceed the rated voltage.
>
> Tim
> [Denver, CO]
>
> > -----Original Message-----
> >
> > > (I also need to know DC power supply voltage
> > > and peak current capability of the servo amps.)
> >
> > Why is it Gecko recommend a voltage supply 4 to 25 times that
> > which the motor is rated for?
> >
> > John H.
> >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>