Re: [CAD_CAM_EDM_DRO] Re: Re: Bridgeport Milling Machines

Yep,however after i got out of the Navy in 73 with hydraulic background i
fixed a number of machines by putting flow checks and accumulator's into
some of those hyd. machines, and turning down the maxium flow a bit so every
time a valve opens or closes you wouldnt get lines in the surface. cul brian
f.

----- Original Message -----
From: "Ray" <rehenry@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, August 24, 2001 8:10 PM
Subject: [CAD_CAM_EDM_DRO] Re: Re: Bridgeport Milling Machines


>
> From: Jon Elson <elson@...>
> <s>
> Sure. 30+ years ago, there were a number of hydraulically operated
> CNC machines. they generally ate their owners alive in maintenance
> cost!
>
> Yep and I grinned all the way to the bank 'cause nobody else in town could
> get them tuned up enough to make a good finish.
>
> Ray
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>