Re: [CAD_CAM_EDM_DRO] Mastercam

Hi Iain:
I have been running Mastercam for a couple of years now.
I got started with a book By Lim and Shiue (not sure of the spelling on that
second name)
It is an excellent resource with a college textbook type layout.
I learned a lot from spending time with it.
I recommend it highly!!
It is available from www.technicalbooks.net, and is called "Mastercam,
Version 8 Mill."
If you have specific questions, feel free to contact me offline.
There is also a really good forum at:
www.emastercam.com/cgi-bin/ultimatebb.cgi
Good luck with your purchase; Mastercam is a really good system for CAM and
not bad for CAD as well.
Keep us posted on your progress.
Cheers

Marcus

-----Original Message-----
From: hllrsr@... <hllrsr@...>
To: CAD_CAM_EDM_DRO@yahoogroups.com <CAD_CAM_EDM_DRO@yahoogroups.com>
Date: Saturday, August 25, 2001 5:42 AM
Subject: [CAD_CAM_EDM_DRO] Mastercam

>Folks,
>In the process of gearing up again, though I think it will with smaller
>equipment for now (god I hate shortages of space!)
>Anyway, I have aquired a complete copy of Mastercam 8.1 (Original, with
>Dongle and with registration transferred to me!) from work and am in
>need of some assistance.
>
>Are there any books on using Mcam?
>
>Our Controller bought the software just before he got fired and never
>thought to get the training pack for it. So it sat on the shelf for 6
>months, the manuals got "lost", and he got his butt fired for the amount
>of money he had wasted on this and other elephants.
>The programmer at work had been using SmartCAM, preferred it, and
>convinced the boss to stay with it so I was offered Mcam at a nominal
>cost (heh,heh).
>
>ANY assistance would be greatly appreciated.
>Iain
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>