CAD CAM EDM DRO - Yahoo Group Archive

Re: Backlash!

Posted by Dan Mauch
on 1999-10-02 08:16:59 UTC
Either that or put a zero backlash ballscrew on the handle :)
Dan
-----Original Message-----
From: stratton@... <stratton@...>
To: cad_cam_edm_dro@onelist.com <cad_cam_edm_dro@onelist.com>
Date: Friday, October 01, 1999 8:56 PM
Subject: [CAD_CAM_EDM_DRO] Backlash!


>From: stratton@...
>
>You know you've been spending to much time in the shop when...
>
>The other morning while taking a shower I decided I wanted to
>adjust the water temperature.
>
>Without thinking, I backed off the knob to take out the backlash, then
>cranked it in to the desired setting.
>
>Chris
>
>--
>Christopher C. Stratton, stratton@...
>Engineer, Instrument Maker & Horn Player
>(978)538-5179 work, (617)492-3358 home
>30 Griswold Street Cambridge, MA 02138
>http://www.mdc.net/~stratton
>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
discussion of shop built systems in the above catagories.
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>

Discussion Thread

stratton@m... 1999-10-01 20:56:30 UTC Backlash! Dan Mauch 1999-10-02 08:16:59 UTC Re: Backlash! stratton@x... 1999-10-02 10:34:47 UTC Re: Backlash!