Re: HELP --- Installation frustration...

Well said.
Dan
-----Original Message-----
From: Steve Carlisle <quatsein@...>
To: CAD_CAM_EDM_DRO@onelist.com <CAD_CAM_EDM_DRO@onelist.com>
Date: Saturday, October 02, 1999 6:59 PM
Subject: Re: [CAD_CAM_EDM_DRO] HELP --- Installation frustration...

>From: "Steve Carlisle" <quatsein@...>
>
>This Linux/EMC thing is similar to a hazing ritual. Everyone
>has to invest the time to play the game. If people do not have
>the time to invest, they should consider other programs, more
>money, less time.
>
>Steve Carlisle
>
>----------
>From: Jon Elson <jmelson@...>
>To: CAD_CAM_EDM_DRO@onelist.com
>Subject: Re: [CAD_CAM_EDM_DRO] HELP --- Installation frustration...
>Date: Saturday, October 02, 1999 5:54 PM
>
>From: Jon Elson <jmelson@...>
>
>
>
>gary@... wrote:
>
>> From: gary@...
>>
>> Hi all you EMC'rs
>>
>> I would like to add my voice to Clint's. I've given this a couple of half
>trys. I would happily pay someone to put all the pices
>> together on a CDrom and a floppy (if necessary) and provide a mini
>installation guide for a standard PC (ok what's std --
>> Pentium >100mz, 32 Mb mem, you pick the video card, floppydrive, CDrom
>drive, Ethernet10/100 card, internal modem and a
>> serialport). Heck, I'd rather buy the whole package installed and tested
>on the machine!!! It's really a time issue for me (and
>> I suspect for others) more than a dollar issue. Any takers???
>
>Well, it just isn't that simple. You still have to make decisions on disk
>partitions, Xwindows & graphics card, network, etc. But, yes, it would
>be nice. I'd be glad to do it, but I don't have a CD writer.
>
>Jon
>
>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the
>discussion of shop built systems in the above catagories.
>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>
>>Welcome to CAD_CAM_EDM_DRO@...,an unmoderated list for the

discussion of shop built systems in the above catagories.

>To Unsubscribe, read archives, change to or from digest.
>Go to: http://www.onelist.com/isregistered.cgi
>Log on, and you will go to Member Center, and you can make changes there.
>For the FAQ, go to http://www.ktmarketing.com/faq.html
>bill,
>List Manager
>