Re: BDI with DRO/Encoder Board
Posted by
wayne2000_7@y...
on 2001-09-03 07:47:56 UTC
David,
I posted a question on the emc mailing list
about whether emc supports 4 axis feedback.
It may only be setup for 2 axis.
I see your using steppermod.
Just a note, I've had real good success
running steppers with freqmod.
Very smooth running.
Regards,
Allen F
--- In CAD_CAM_EDM_DRO@y..., "David Kryskowski"
<kryskowski.david@a...> wrote:
I posted a question on the emc mailing list
about whether emc supports 4 axis feedback.
It may only be setup for 2 axis.
I see your using steppermod.
Just a note, I've had real good success
running steppers with freqmod.
Very smooth running.
Regards,
Allen F
--- In CAD_CAM_EDM_DRO@y..., "David Kryskowski"
<kryskowski.david@a...> wrote:
>from
> And the saga continues:
>
> I finally figured out how to use cvs to download the latest stuff
> sourceforge. I actually had to move the computer to a differentsite
> due to the firewall. I did not know how to get around it. Well Ilinux.org
> downloaded and compiled. I used the install script from the
> download. Everything compiled just fine. I tried to run emc.runand
> got a lot of "could not set max velocity". There was a code changerun.
> 17-Aug-2001 in emcSetMaxVelocity. I simply commented out the return
> (fuction); to just return 0; I could get emc using stepmod.o to
> Now trying with smdromod.o was not so good. On startup you couldsee X
> and Y tracking and Z still stuck. But the jogging did not even workfor
> X and Y! Due to both myself and Allen F. (this message) getting thetime
> same result I must assume the error is somewhere in the code.
> Unfortunately I do not have the horsepower to track this error down.
> Additionaly I did not get an opportunity to test deskncrt due to
> constraints.
>
> We will be running our machine with stepmod.o for now until the DRO
> board problem is fixed for the Z axis.
Discussion Thread
David Kryskowski
2001-08-26 21:24:17 UTC
BDI with DRO/Encoder Board
Jon Elson
2001-08-26 23:22:10 UTC
Re: [CAD_CAM_EDM_DRO] BDI with DRO/Encoder Board
David Kryskowski
2001-08-27 06:00:18 UTC
Re: [CAD_CAM_EDM_DRO] BDI with DRO/Encoder Board
David Kryskowski
2001-08-27 22:20:38 UTC
[CAD_CAM_EDM_DRO] BDI with DRO/Encoder Board
Jon Elson
2001-08-28 11:11:07 UTC
Re: [CAD_CAM_EDM_DRO] BDI with DRO/Encoder Board
kryskowski.david@a...
2001-08-29 05:12:50 UTC
Re: BDI with DRO/Encoder Board
wayne2000_7@y...
2001-08-29 18:14:32 UTC
Re: BDI with DRO/Encoder Board
David Kryskowski
2001-08-29 21:43:32 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI with DRO/Encoder Board
David Kryskowski
2001-09-02 17:36:12 UTC
RE: [CAD_CAM_EDM_DRO] BDI with DRO/Encoder Board
wayne2000_7@y...
2001-09-03 07:47:56 UTC
Re: BDI with DRO/Encoder Board
David Kryskowski
2001-09-03 14:25:08 UTC
Re: [CAD_CAM_EDM_DRO] Re: BDI with DRO/Encoder Board