CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Sheldon Lathe

Posted by Lew Best
on 2001-09-13 19:47:47 UTC
Hi Mike

Don't recall what I posted, but really like my Sheldon. Have had precious
little time to use it (just got it for hobby use) but will be happy to try
to answer any questions I can, on list or off. My email addy is
bcl@... or lewbest@....

Lew

-----Original Message-----
From: Mike Phillips [mailto:mikep_95133@...]
Sent: Thursday, September 13, 2001 3:08 PM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] Sheldon Lathe

Gents,

I searched this group and found one good thread for Sheldon Lathes.

Thanks Lew!

The Lathe I am considering buying is a Sheldon, variable speed lathe.
I have been told that variable speed Sheldon's are a bit rare.

It's about 13" X 36", maybe slightly larger.

It has been mechanically restored and repainted. The ways are stock
and perfect. It's being sold with an 8" 4 jaw, 6" 3 jaw, live & dead
centers, and about 20 5C collets.

Just so I do not make a gross $$$ error, I am wondering how $4000
sounds for all of this. I know the guy pretty well, he helped me
rebuild my series 1 BP mill. I would like to get a Hardinge, but they
are hard to find in this price range.

Can a Sheldon hold tolerance like a Hardinge? Any pros/cons to either
unit in terms of useage.

Thanks,

Mike






Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

Mike Phillips 2001-09-13 13:08:29 UTC Sheldon Lathe Lew Best 2001-09-13 19:47:47 UTC RE: [CAD_CAM_EDM_DRO] Sheldon Lathe Mike Phillips 2001-09-14 13:35:30 UTC Re: Sheldon Lathe Les Watts 2002-07-06 11:12:56 UTC Sheldon Lathe