Re: Beaver turret miller

--- In CAD_CAM_EDM_DRO@y..., <info.host@b...> wrote:

> Hello,
>
> I got some pictures through from the man selling the Beaver

mill I was

> talking about. The table and way, to me the total newbie, look in

good

> condition. On the picture I see a big breaker box I think on it's

back that

> has two cables running to the motor, on into the back of the

spindle motor

> and another into the belt's cover. Any clues as to what the extra

one is

> that is going into the belt cover? There is a vertical table

transverse


OK I'll try again.
I posted this before but it got lost.
One cable is to the motor and the second cable is to the stop start
switch on the front of the head.
Don't worry about the table lift motor. Either wind it by hand like a
bridgy or replace it with a 24V or 110v DC so it will reverse easily.

> It's marked belt for alter the head's position on the
> 360 about the base is either mucky or needs replacing, no big deal.
>

Can we have this last remark in English, may be able to answer it.