Re: [CAD_CAM_EDM_DRO] Autolube?

Hello Roger it depends on your machine, size and use.
But I saw in a few occasions: 3 shots as soon you switch on the machine
and then every 8 to 15 minutes (mostly 10).
Hope that helps.
Sven Peter

vrsculptor@... wrote:

>
> My Tree mill has both a manual (Bueler) one shot and a 110V power
> oiler. When I scrapped the original controller I lost my electrical
> connection to the power oiler. Any opinions on how often the power
> oiler should be activated? I was thinking of tieing a timer circuit
> to the spindle run/enable. I'm not completely convinced its worth
> messing with as the one shot hits the same places.
>
> Roger
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/