Re: [CAD_CAM_EDM_DRO] Large stepper sources or size part 2
Posted by
Jon Anderson
on 2001-10-04 08:01:31 UTC
karl@... wrote:
drive.
Don't recall the mfg name on the motors, but they are being driven by
Compumotor
OEM650 drives at 7.4 amps.
Jon
> P.S. Is anybody getting by with much smaller steppers on a full sizeI was told the motors on my mill are 800 oz/in and they are direct
> knee mill?
drive.
Don't recall the mfg name on the motors, but they are being driven by
Compumotor
OEM650 drives at 7.4 amps.
Jon
Discussion Thread
karl@c...
2001-10-04 04:58:41 UTC
Large stepper sources or size part 2
Jon Anderson
2001-10-04 08:01:31 UTC
Re: [CAD_CAM_EDM_DRO] Large stepper sources or size part 2
currinh@O...
2001-10-04 08:14:59 UTC
Re: Large stepper sources or size part 2
Ron@R...
2001-10-04 18:39:45 UTC
Re: Large stepper sources or size part 2
vrsculptor@h...
2001-10-05 20:03:56 UTC
Re: Large stepper sources or size part 2
Tim Goldstein
2001-10-05 20:44:28 UTC
RE: [CAD_CAM_EDM_DRO] Re: Large stepper sources or size part 2