Re: [CAD_CAM_EDM_DRO] Tapping with a Procunier Device

Hello
it is not difficult to make new one . it has some gears and spring. when
it tapping in it drives directly and when it tapping out it reverse be
attaching the second gear.
i am gear specialist.
but thank for ur good information.
SHABBIR


At 05:11 AM 10/9/01 +0000, you wrote:

>There have been several discussions on tapping. I wanted to share a
>recent success. The person who sold me my milling machine told me
>about an automatic tapping device made by Procunier. This device
>mounts in the drill press and automatically taps (forward/reverse) by
>using the Z Axis of the drill press.
>
>I bought a unit and some taps. Today, I made holes and tapped them.
>It was easy and they all came out successful.
>
>The device is not cheap but well worth it. Keep you eyes open on
>eBay for a unit. It may be a useful tool.
>
>-Eric
>
>
>Addresses:
>FAQ: http://www.ktmarketing.com/faq.html
>FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
>Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
>Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
>Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
>List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
>Moderator: jmelson@... timg@... [Moderator]
>URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
>bill,
>List Manager
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>