CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work

Posted by Tim Goldstein
on 2001-10-09 21:32:39 UTC
Jerry,

I read your previous post, but have a hard time accepting the results. Do
you think they are not telling the truth on the MSDS when they say it
contains Aliphatic Petroleum Distillates 70% and Petroleum Base Oil >20%?

I would venture not.

Interesting searching an MSDS database for Aliphatic Petroleum. Turns up
Clorox brand lighter fluid for charcoal briquettes as 100% Aliphatic
Petroleum. Sure is sounding like something close to stoddard solvent
(Naphtha) to me.

Tim
[Denver, CO]

> -----Original Message-----
>
>
> Tim Goldstein wrote:
>
> > It appears that a good proportion is stoddard solvent.
>
> Not a trace of stoddard solvent..... See my previous post. I
> analyzed it.
>
> JerryK
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Discussion Thread

Niyom Racharin 2001-10-08 23:43:59 UTC Use Router for metal work Doug Fortune 2001-10-09 00:36:31 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Eric Keller 2001-10-09 04:53:39 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Les Newell 2001-10-09 05:02:37 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jon Elson 2001-10-09 11:01:29 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 11:56:39 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Ethan Vos 2001-10-09 12:08:33 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Tim 2001-10-09 12:29:32 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Ethan Vos 2001-10-09 12:33:41 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Carey L. Culpepper 2001-10-09 12:48:41 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Dan Mauch 2001-10-09 13:21:47 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work William Scalione 2001-10-09 15:11:38 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Ron Yost 2001-10-09 15:17:50 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 19:52:27 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 20:55:13 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work David Goodfellow 2001-10-09 21:02:37 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Tim Goldstein 2001-10-09 21:08:16 UTC RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Brian Walsh 2001-10-09 21:14:06 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 21:14:48 UTC Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Jerry Kimberlin 2001-10-09 21:17:53 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Tim Goldstein 2001-10-09 21:32:39 UTC RE: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work M. SHABBIR MOGHUL 2001-10-09 21:34:20 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Brian Walsh 2001-10-09 21:36:12 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work Jerry Kimberlin 2001-10-09 21:55:01 UTC Re: [CAD_CAM_EDM_DRO] WD-40, was:Use Router for metal work Carol & Jerry Jankura 2001-10-10 05:39:11 UTC RE: [CAD_CAM_EDM_DRO] Use Router for metal work Smoke 2001-10-10 06:29:28 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work johnhe 2001-10-10 07:32:23 UTC Re: [CAD_CAM_EDM_DRO] Use Router for metal work