Re: [CAD_CAM_EDM_DRO] Small stuff

John,

The J&L Industrial Supply Catalog (2001) has the following solid carbide
endmills on page 407. They come in both 2 flute or 4-flute square end only
all with 1/8" shanks.

Cutting diameters of 0.010", 0.015", 0.020", 0.025", 0.030"

You can contact them by phone at 1-800-521-9520 or on the web at
www.jlindustrial.com


HTH,
Daniel J. Statman, Statman Designs
http://members.rennlist.com/statmandesigns

----- Original Message -----
From: "johnhe" <johnhe@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, October 13, 2001 7:35 AM
Subject: [CAD_CAM_EDM_DRO] Small stuff


> Has anyone ever seen end mills under 0.5mm? If so, where abouts? I don't
> really have any use for them right now but I'm just wondering.
>
> John H.
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>