CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Rust perventative

Posted by Jon Elson
on 2001-10-15 10:39:49 UTC
Bruce Klawiter wrote:

> Help,
>
> Is there a spray on rust preventative I can use on my machine tools to keep the rust off. I have my machines in my garage and am having a real problem keeping up. I would like to find something I can spray on when I done with a machine and use it again later without having to clean the stuff off. Sometimes my machine sits months without being used.

I use LPS-1 in the pump spray bottle. This stuff is somewhat like WD-40,
but leaves a light oily film on the machine surfaces. it creeps to cover the entire
surface. I use water-based coolant, and have the machines in a basement that
gets a bit damp in the summers. I've never had rust when this stuff is used.
I never clean it off, as the film is invisible after an hour or two.
I get this from any machine tool catalog supplier, like MSC, J&L, KBC, etc.

Jon

Discussion Thread

Bruce Klawiter 2001-10-14 22:59:54 UTC Rust perventative vrsculptor@h... 2001-10-15 05:07:24 UTC Re: Rust perventative chuknospam@a... 2001-10-15 06:36:35 UTC Re: Rust perventative Sven Peter 2001-10-15 06:55:21 UTC Re: [CAD_CAM_EDM_DRO] Rust perventative Jon Elson 2001-10-15 10:39:49 UTC Re: [CAD_CAM_EDM_DRO] Rust perventative brian 2001-10-15 19:23:47 UTC Re: [CAD_CAM_EDM_DRO] Rust perventative