CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] I need controllers and steppers

Posted by Dan Statman
on 2001-10-21 17:18:35 UTC
I am extremely happy with my 3-axis 2A bipolar chopper driver kit from
Camtronics and the 160 oz-in bipolar stepper motors also purchased from
camtronics. I am using them on a new converted Sherline mill. If you have
any questions do not hesitate to ask me and I will help you. The driver kit
is $150 and the motors are $85 ea. The kit takes about 4-5 hours to
assemble, and I knew nothing about soldering electronics.

Daniel J. Statman, Statman Designs
www.statmandesigns.com


----- Original Message -----
From: <luisguillermo98@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, October 21, 2001 7:35 PM
Subject: [CAD_CAM_EDM_DRO] I need controllers and steppers


> Can someone recomend me an economic control,driver,stepper to be used
> on a sherline?
>
>
>
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Discussion Thread

luisguillermo98@y... 2001-10-21 16:35:09 UTC I need controllers and steppers Alan Trest 2001-10-21 16:46:56 UTC Re: I need controllers and steppers Dan Statman 2001-10-21 17:18:35 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers luisguillermo98@y... 2001-10-21 17:18:47 UTC Re: I need controllers and steppers luisguillermo98@y... 2001-10-21 17:24:35 UTC Re: I need controllers and steppers JanRwl@A... 2001-10-21 18:07:47 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers FIK 2001-10-21 18:52:25 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers Carol & Jerry Jankura 2001-10-21 19:02:23 UTC RE: [CAD_CAM_EDM_DRO] I need controllers and steppers Tim Goldstein 2001-10-21 19:08:44 UTC RE: [CAD_CAM_EDM_DRO] I need controllers and steppers ccs@m... 2001-10-21 19:14:57 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers Tim Goldstein 2001-10-21 19:24:13 UTC RE: [CAD_CAM_EDM_DRO] I need controllers and steppers Dan Statman 2001-10-21 20:51:09 UTC Re: [CAD_CAM_EDM_DRO] Re: I need controllers and steppers wanliker@a... 2001-10-22 05:33:40 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers M. SHABBIR MOGHUL 2001-10-26 10:00:28 UTC Re: [CAD_CAM_EDM_DRO] I need controllers and steppers