Re: [CAD_CAM_EDM_DRO] Re: I need controllers and steppers

I have had the CNC up and running for 2 weeks. No problems cutting
titanium, but I take light cuts with tiny cutters. The cutters will break
LONG before the machine flexes. I upgrade the spindle to the new pulley
system from Sherline for 10,200 max RPM.

Dan.

----- Original Message -----
From: <luisguillermo98@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Sunday, October 21, 2001 8:24 PM
Subject: [CAD_CAM_EDM_DRO] Re: I need controllers and steppers


> Hello Dan;
> I am looking for a system to upgrade a sherline to CNC. I am
> wondering if the stepper motors you mentioned (160 oz will be enought
> to cut stainless steel. I know that you are an expert working with
> titanium so tell me about your Camtronic experience working with this
> hard metal..
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>