Re: Gecko and Servos

The correct servo web address
http://www.aaaim.com/cgi-local/shop991/shop.pl/SID=14213756265/page=DC
ME.htm#DCME9450

Sorry about that I don't know what happened with cut & paste

Frank
FRP Enterprise

--- In CAD_CAM_EDM_DRO@y..., shymu@b... wrote:
> Resolution of 2048 (4x 512 encoder). I'm running a 1 inch pitch
lead
> screw, at 12 in a sec., but then I'm milling a low density
material.
> With a 5 or 10 inch pitch one could do some damage. Great combo the
> Gecko's and servo's you talking about. I bought mine from
Camtronics
> ,... but ,.. see this
>
http://www.aaaim.com/cgi-local/shop991/shop.pl/SID=14213756265/page=DC
> ME.htm#DCME9450 stock # DCME9950. The same thing ??
>
> If you need any help with a servo setup let me know , it's a piece
of
> cake to do. Go the servo route.
>
> Frank
>
> FRP Enterprise
>
> --- In CAD_CAM_EDM_DRO@y..., wanliker@a... wrote:
> > Has anybody on the list used Camtronics smaller servos (190
in/oz)
> with the
> > Gecko 320's?
> > What kind of resolution are you getting?
> > Speed?
> > What sized machine?
> > Any other information that you care to share?
> > Good Combination?
> > Thanks,
> > bill
> >
> >
> > [Non-text portions of this message have been removed]