Re: [CAD_CAM_EDM_DRO] Re: Gecko and Servos Again !

How about the following:

What size stepper would this be equivalent to?


2600 RPM GLOBE MOTORS, #537A274. 30.3 VDC permanent magnet reversible motor.
The motor has ball bearings and has an optical encoder mounted on the rear.
The no-load speed is 3780 rpm, no-load current is 0.2 amp. With a load of 60
oz-in, the rpm is 2600 @ 5.6 amps. This is a very powerful cool running
motor. The encoder employs a Hewlett Packard HEDS 9100 read head with a
custom encoder disc. The encoder has a two-channel quadrature output with 512
counts per revolution. The encoder requires 5 VDC at approx. 40 mA for
operation. The shaft is 1/4" dia. x 7/8" long. The shaft has a flat running
full length. The motor has four tapped mounting holes on the shaft end of the
motor face. The holes are tapped for #6X32 tpi screws. The bolt centers are
1-1/16" apart. Electrical connections are made via 3/16" quick connect tabs
connected to the brush bosses. Dimensions: 2-1/8" dia. x 5" long. Stock
#DCME9950

Thanks,
bill


[Non-text portions of this message have been removed]