Re: Gecko and Servos Again !

The web address I posted includes ME.htm#DCE9450. I don't know why
this last part is not highlighted.

--- In CAD_CAM_EDM_DRO@y..., shymu@b... wrote:
> The correct servo web address
>
http://www.aaaim.com/cgi-local/shop991/shop.pl/SID=14213756265/page=DC
> ME.htm#DCME9450
>
> Sorry about that I don't know what happened with cut & paste
>
> Frank
> FRP Enterprise
>
>
> --- In CAD_CAM_EDM_DRO@y..., shymu@b... wrote:
> > Resolution of 2048 (4x 512 encoder). I'm running a 1 inch pitch
> lead
> > screw, at 12 in a sec., but then I'm milling a low density
> material.
> > With a 5 or 10 inch pitch one could do some damage. Great combo
the
> > Gecko's and servo's you talking about. I bought mine from
> Camtronics
> > ,... but ,.. see this
> >
>
http://www.aaaim.com/cgi-local/shop991/shop.pl/SID=14213756265/page=DC
> > ME.htm#DCME9450 stock # DCME9950. The same thing ??
> >
> > If you need any help with a servo setup let me know , it's a piece
> of
> > cake to do. Go the servo route.
> >
> > Frank
> >
> > FRP Enterprise
> >
> > --- In CAD_CAM_EDM_DRO@y..., wanliker@a... wrote:
> > > Has anybody on the list used Camtronics smaller servos (190
> in/oz)
> > with the
> > > Gecko 320's?
> > > What kind of resolution are you getting?
> > > Speed?
> > > What sized machine?
> > > Any other information that you care to share?
> > > Good Combination?
> > > Thanks,
> > > bill
> > >
> > >
> > > [Non-text portions of this message have been removed]