CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass

Posted by Chris L
on 2001-10-26 18:38:12 UTC
Travel Speed ? - Fast as possible
Spindle Rpm ? - Wide Open
Coolant ? Only for the glassiest of edge.....

But try that ONLY with D-Shaped sharpened blanks from Antares !
http://www.antaresinc.net/

When I started cutting plastics with their tooling..... I threw the rest out
!

The best I have ever found. (period)
Chris L

carlcnc@... wrote:

> A local sign shop has asked me to cut some stuff from 1/4" acrylic.
> I checked several manufacturers web sites for speeds and feeds.
> Came up with "nada"
> anyone have suggestions or rule of thumb for sfm,type of cutters
> -O-flute?]
> thanks
> Carl
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Discussion Thread

carlcnc@e... 2001-10-26 18:32:18 UTC routing acrylic/plexiglass Chris L 2001-10-26 18:38:12 UTC Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass Jon Elson 2001-10-26 23:48:33 UTC Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass Bob Campbell 2001-10-27 06:23:02 UTC Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass Sven Peter 2001-10-27 15:38:48 UTC Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass JanRwl@A... 2001-10-27 15:51:39 UTC Re: [CAD_CAM_EDM_DRO] routing acrylic/plexiglass