Re: 635 in/oz steppers on E-bay
Posted by
tom.kay@n...
on 2001-11-01 06:22:56 UTC
About those 635 oz-in motors:
I contacted Pac Sci about these, as they bought Sigma, and their
concern was the age of the motors. These are 10 or 12 years old, and
the guy was concerned that the bearing grease might have dried up.
They would not re-lube them, as the motors are discontinued, they
would not even re-magnetize the internals if someone took them apart
to re-lube. I guess taking steppers apart is a no-no in the first
place, right?
But if these beasties work, it would be a prett good deal. Pays yer
money and takes yer chances.
Tom.
I contacted Pac Sci about these, as they bought Sigma, and their
concern was the age of the motors. These are 10 or 12 years old, and
the guy was concerned that the bearing grease might have dried up.
They would not re-lube them, as the motors are discontinued, they
would not even re-magnetize the internals if someone took them apart
to re-lube. I guess taking steppers apart is a no-no in the first
place, right?
But if these beasties work, it would be a prett good deal. Pays yer
money and takes yer chances.
Tom.
--- In CAD_CAM_EDM_DRO@y..., "Tim Goldstein" <timg@k...> wrote:
> http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItem&item=1655789051
>
> I have no interest or association with these, but the seller has 3
auctions
> listed for some nice looking 8 wire 635 in/oz steppers. Has a buy
it now of
> $210 on each lot of 3 motors. Only thing odd about them is that
they are
> face mount, not a flange like most steppers. My guess is they would
be NEMA
> 34 units if they have a flange.
>
> Thought they would be a good deal for anyone that is flexible in
mounting
> style.
>
> Tim
> [Denver, CO]
>
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
Discussion Thread
carlcnc@e...
2001-10-31 19:48:57 UTC
emails and DXF
Chris L
2001-10-31 20:06:22 UTC
Re: [CAD_CAM_EDM_DRO] emails and DXF
Tim Goldstein
2001-10-31 20:08:15 UTC
635 in/oz steppers on E-bay
JanRwl@A...
2001-10-31 20:25:03 UTC
Re: [CAD_CAM_EDM_DRO] 635 in/oz steppers on E-bay
tom.kay@n...
2001-11-01 06:22:56 UTC
Re: 635 in/oz steppers on E-bay
Marc Resides
2001-11-04 09:22:24 UTC
Re: [CAD_CAM_EDM_DRO] Re: 635 in/oz steppers on E-bay
Marc Resides
2001-11-04 09:48:14 UTC
Re: [CAD_CAM_EDM_DRO] Re: 635 in/oz steppers on E-bay