CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills

Posted by Paul
on 2001-11-03 06:56:56 UTC
Hi Rich

I have responded on list regarding using ball screws...
Stepper motors will be used through out, and I intend to use direct drive on
the X and Y axis. Z will have to have some gearing unless I can find a larger
stepper. I do have an assortment of toothed belts and pullies if direct drive
doesn't work to well.

I can certainly email pictures of the various parts as and when I make them.
Of all the axis, Y looks like it will cause the most problems if I'm not to
loose any travel. There looks to be plenty of space within the base casting,
but I will probably end up doing quite a bit of machining to get everything
to fit in.

It will be a few weeks before I can make a real start on the conversion -
Need to finish of one outstanding project and then get the mill home from the
office. I'll email some small images over as I progress, and if there are any
questions, feel free to ask.

Regards, Paul.

On Friday 02 November 2001 11:58 pm, Rich Goldner wrote:
> Hi Paul,
>
> I also have a Grizzly mini-mill. I'm very interested in your CNC
> conversion. Can you offer any details? Are you going to use the
> standard Z-axis or build a leadscrew for it? What size motors are
> you using? Servos or steppers? Which driver card? Any pictures? Are
> you going to go with direct drive or use gears/pullys? What do you
> think the cost will be?
>
> Sorry for all the questions, but just thinking about this gets me
> excited. I really want to do this to my mill also.
>
> Please keep us informed.
>
> Thanks!

Discussion Thread

Paul 2001-11-02 15:52:10 UTC Grizzly mini mills Rich Goldner 2001-11-02 15:58:30 UTC Re: Grizzly mini mills Jerry Kimberlin 2001-11-02 16:36:50 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills S.L.Ramsay 2001-11-02 17:36:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills Jerry Kimberlin 2001-11-02 18:02:58 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills S.L.Ramsay 2001-11-02 18:50:44 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills Jerry Kimberlin 2001-11-02 19:53:15 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills Paul 2001-11-03 06:56:14 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills Paul 2001-11-03 06:56:56 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly mini mills rehenry 2001-11-03 07:57:15 UTC Re: Re: Re: Grizzly mini mills S.L.Ramsay 2001-11-03 13:44:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Re: Re: Grizzly mini mills dj_lettuce_bee 2002-01-15 13:07:19 UTC Re: Grizzly MiniMills&CNC Paul 2002-01-15 15:15:39 UTC Re: [CAD_CAM_EDM_DRO] Re: Grizzly MiniMills&CNC stevenson_engineers 2002-01-15 15:54:46 UTC Re: Grizzly MiniMills&CNC