Re: [CAD_CAM_EDM_DRO] Tooth belts & gear suppliers

----- Original Message -----
From: "Eric Keller" <keller137@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Saturday, November 03, 2001 2:25 PM
Subject: Re: [CAD_CAM_EDM_DRO] Tooth belts & gear suppliers


> >
> > I want to do a CNC conversion on a small mill using either NEMA 23 or 32
> size servos / stepper motors. I do not want to use a direct drive setup.
> Instead, I'd like to power the ball screws using "tooth belts" and
matching
> gears using an offset axis system.
> >
> > Who supplies a variety of small, but strong, tooth belts and gears? Any
> ideas?
>
>
> McMaster or Berg are the usual suspects. Anyone know of better, please
> advise
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>