RE: [CAD_CAM_EDM_DRO] Monitor problems in dos mode

I had somewhat similar troubles with a monitor going into "suspend" mode
while part way through a program because of the lack of keyboard/mouse
input... and it was running DOS... I had to disable Energy Saver Compliance
in the BIOS setup to rectify it...

-----Original Message-----
From: mark [mailto:mfraser@...]
Sent: Thursday, 08 November, 2001 9:05 AM
To: cadcam
Subject: [CAD_CAM_EDM_DRO] Monitor problems in dos mode


I had an awful time trying to make a newer plug'n'play monitor work.
Exactly the same problem. In fact, that's why it was sitting in the
"take it
home, it doesn't work, and we can buy a new one for less than repair
costs"
area.

It became completely functional when I put Win98 on my W95 machine.
I doon't recall for sure, I may have put an older (and always 100
percent
compatible) S3 Virge video card in.

It has to do with putting the monitor to sleep, not the fact that it's
turning
into an electrostatic dust precipitator.... /mark



Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/