Re: [CAD_CAM_EDM_DRO] step and direction software

Brent,
Well, if Ability is overkill, I would assume Flashcut is also for your
aplication.
So, How about trying Art Fenerty's Master5 program. I have heard good things.

Chris L

brent davidson wrote:

> hello, i am looking for software to run a simple 2 axis gantry system
> with simple on off tool control, similar to a simple 2 axis plasma
> cutter. i have checked out ability systems indexer lpt and master 5,
> however these two seem to be overkill for my app. Any suggestions on
> this to keep it simple. basically just need hpgl import, set start
> coordinates and cut til done, emergency stop, etc.
>
> P.s,
>
> this group is wonderful and has helped me alot. keep up the fine work.
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/