CAD CAM EDM DRO - Yahoo Group Archive

Re: [CAD_CAM_EDM_DRO] is 210 oz/in way overkill for a Sherline

Posted by ccs@m...
on 2001-11-28 07:15:19 UTC
> I was going to take the higher torque is better to be sure no matter
> what I won't need feedback and go with 210 oz/in steppers for my
> Sherline. Am I insane? Is there any truth to being 210 vs. 155, vs.
> 110, vs. 60?

Be sure that motors that large will fit. I'd be very concerned about
the weight of a motor that big hanging on the X axis (lathe cross
slide or mill X). 150 oz/in NEMA23's work fairly well. It's possible
to do good work with much smaller motors, it's just you will wait much
longer for non-cutting 'rapid' moves to reposition the tool.

Chris

-------------------------------------------------
Christopher C. Stratton
Engineer, Instrument Maker, and Horn Player
ccs@... 617 628 1062
http://web.mit.edu/~stratton/www/brassbuild.html

Discussion Thread

mszollar@g... 2001-11-27 21:44:24 UTC is 210 oz/in way overkill for a Sherline Tony Jeffree 2001-11-28 02:44:58 UTC Re: is 210 oz/in way overkill for a Sherline ccs@m... 2001-11-28 07:15:19 UTC Re: [CAD_CAM_EDM_DRO] is 210 oz/in way overkill for a Sherline Tim 2001-11-28 08:39:20 UTC RE: [CAD_CAM_EDM_DRO] is 210 oz/in way overkill for a Sherline JanRwl@A... 2001-11-28 16:35:20 UTC Re: [CAD_CAM_EDM_DRO] is 210 oz/in way overkill for a Sherline