CAD CAM EDM DRO - Yahoo Group Archive

Re: Shaft Support Rails - Bonding of

Posted by andesign2
on 2001-12-13 15:53:52 UTC
Check out this link.

http://www.super-tech.com/root/mechInfo/rodmounting.htm

Jason

--- In CAD_CAM_EDM_DRO@y..., "John Harnedy" <jharnedy@e...> wrote:
> List,
> Recently someone mentioned that they were using an adhesive to fix
precision shafts onto shaft support rails ( the ones that resemble an
upsidedown T. Normally they are screwed together.
>
> I have some support rails for 1" ( 25.4mm shaft ) and have some
25mm h6 precision shafts. As shafts are HRC 60, impossible for me to
drill and tap them. So info on adhesive used would be useful.
>
> TIA
> John
>
>
> [Non-text portions of this message have been removed]

Discussion Thread

John Harnedy 2001-12-13 10:21:46 UTC Shaft Support Rails - Bonding of Smoke 2001-12-13 11:14:24 UTC Re: [CAD_CAM_EDM_DRO] Shaft Support Rails - Bonding of andesign2 2001-12-13 15:53:52 UTC Re: Shaft Support Rails - Bonding of JanRwl@A... 2001-12-15 21:38:03 UTC Re: [CAD_CAM_EDM_DRO] Shaft Support Rails - Bonding of ka1bbg 2001-12-16 14:37:50 UTC Re: [CAD_CAM_EDM_DRO] Shaft Support Rails - Bonding of