CAD CAM EDM DRO - Yahoo Group Archive

RE: [CAD_CAM_EDM_DRO] Master6 Engine

Posted by Tim
on 2002-01-04 13:31:49 UTC
AMD Thunderbird 1.4 ghz
Asus motherboard A7A266
Windows 2000
512 mb DDR ram

4271640 in the Freqency in Hertz box
1243416 in the WatchDog count box

Tim
[Denver, CO]



> -----Original Message-----
>
>
> Hi All:
>
> For those of you who like to play in XP , or are really
> bored, :), I have just uploaded the prototype of the Master6
> Pulseing engine for XP. I haven't yet got it working under
> ME or 98SE, and I don't know if it will run in Win2000 ( it
> should), but I'd appreciate any feedback on the numbers
> displayed on the test screen.
> Install instructions are included in the file. It is a
> Device Driver and installed just like any hardware. It can be
> deleted from the ControlPanel under System/Hardware.
>
> Basically, it just opens a window showing how many pulses per
> second it is doing at the moment. ( locked it to 50,000 but
> its controllable to 100,000 ) and the average latency, max
> latency and min for both the main timer and the "WatchDog"
> timer which is implemented. Since no-one has run it but me, I
> have no idea how many machines can run it, or what CPU's
> could have a problem, but it was written to eliminate the
> pickyness that Master5 can exhibit.
>
> Just install the driver, reboot, and run the test application.
>
> So, If your feeling lucky and would like to see how your fast
> your windows can pulse....I'd really appreciate any feedback.
>
> Thanks,
> Art (URL for file is below..Timer50000.zip)
>
http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/Timer50000.zip
Master5 Software
http://users.andara.com/~fenerty/master.htm



[Non-text portions of this message have been removed]


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Discussion Thread

Tim 2002-01-04 13:31:49 UTC RE: [CAD_CAM_EDM_DRO] Master6 Engine Rick Miller 2002-01-04 14:08:11 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine Art Fenerty 2002-01-04 14:13:41 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine Art Fenerty 2002-01-04 14:14:46 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine Keith Rumley 2002-01-05 16:55:26 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine Art Fenerty 2002-01-05 19:26:52 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine Chris L 2002-01-05 21:57:46 UTC Re: [CAD_CAM_EDM_DRO] Master6 Engine