Re: Just got my toy to work!

Hello Woodknack here,
Any questions I will be happy to answer. I just bought a Roto
zip for the spindle motor. It works great, Has 4 speeds from 15,000
to 30,000. It also has 2 tiny lights down by the chuck to aluminate
your work. This thing has loads of power. Like I said I just kind of
wung it putting it together. Fell free to ask away. Im still very new
to this hobby and am still trying to figure everything out. Thank god
I have an understanding wife!

--- In CAD_CAM_EDM_DRO@y..., Alan Marconett KM6VV <KM6VV@a...> wrote:
> Hi Lee (?)
>
> Which router? Dan's, Milton's, or Woodknack's? I'd contact Nuts &
Volts
> for a reprint on the article.
>
> Alan KM6VV
>
>
> ledinger wrote:
> >
> > Any more information on this Router?
> >
> > ----- Original Message -----
> > From: "Alan Marconett KM6VV" <KM6VV@a...>
> > To: "CAD CAM" <CAD_CAM_EDM_DRO@y...>
> > Sent: Wednesday, January 02, 2002 12:00 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Just got my toy to work!
> >
> > > Hi WOODKNACK, Norm,
> > >
> > > As posted previously...
> > >
> > > Alan Marconett KM6VV wrote:
> > > >
> > > > Hi Norm,
> > > >
> > > > Right here! Name's Alan. 440.85 Mhz, pl...
> > > >
> > > > Actually, I might add, I didn't BUILD the router, I just
posted the pix,
> > > > and studied the plans! It's built using ball bearing drawer
slides,
> > > > 1/4"-20 threaded rod (as I recall), and small steppers. Dan
wrote the
> > > > article, but doesn't have a reprint, and as you know, Nuts &
Volts owns
> > > > it. I'd put out a call for Milton; "CQ CQ CQ Milton..." ;>)
> > > >
> > > > Seriously I'd contact Milton. Milton are you still
listening? Or,
> > > > email me off list and I'll provide whatever info I can (for
any and
> > > > all).
> > > >
> > > > You might also look at:
> > > >
> > > > http://hometown.aol.com/drigotti/HobbyCNC.htm
> > > >
> > > > Dave has an extensive set of router plans. Uses Kirk Motion
parts.
> > > > Obviously more expensive! But depending what you are looking
for...
> > > >
> > > > HTH
> > > >
> > > > Alan KM6VV
> > >
> > > Nuts and Volts may sell reprints. Milton arranged for me to
see a copy
> > > of Dan's article. I posted Milton's pix for him.
> > >
> > > Your router project seems to be doing fine! Perhaps YOU could
post
> > > plans for those interested.
> > >
> > > Alan KM6VV
> > >
> > >
> > > > Hello I posted pictures of my new toy I have been working on
now for
> > > > sometime. Still not done have alot to do to it. Its in the
photo
> > > > section under WOODKNACK. I saw some photos under the file
section of
> > > > a modified Dan Mauch's machine. I tried to get ahold of the
guy to
> > > > find out where I could get the plans, but had no luck. So I
built it
> > > > with the photos he had in the file section. Just kind of wung
it!
> > > > Did'nt come out to bad I think. Like I said still need to do
alot
> > > > more to it. Total cost so far is around $300 dollars with
everything
> > > > you see in the photos. Still need to buy a trim router for
it..
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@y...
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > > Moderator: jmelson@a... timg@k... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@y...
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@y...
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@y...
> > List owner: CAD_CAM_EDM_DRO-owner@y..., wanliker@a...
> > Moderator: jmelson@a... timg@k... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/