Re: [CAD_CAM_EDM_DRO] Re: Just got my toy to work!

----- Original Message -----
From: "Alan Marconett KM6VV" <KM6VV@...>
To: <CAD_CAM_EDM_DRO@yahoogroups.com>
Sent: Friday, January 04, 2002 12:37 PM
Subject: [CAD_CAM_EDM_DRO] Re: Just got my toy to work!


> Hi Lee (?)
>
> Which router? Dan's, Milton's, or Woodknack's? I'd contact Nuts & Volts
> for a reprint on the article.
>
> Alan KM6VV
>
>
> ledinger wrote:
> >
> > Any more information on this Router?
> >
> > ----- Original Message -----
> > From: "Alan Marconett KM6VV" <KM6VV@...>
> > To: "CAD CAM" <CAD_CAM_EDM_DRO@yahoogroups.com>
> > Sent: Wednesday, January 02, 2002 12:00 PM
> > Subject: [CAD_CAM_EDM_DRO] Re: Just got my toy to work!
> >
> > > Hi WOODKNACK, Norm,
> > >
> > > As posted previously...
> > >
> > > Alan Marconett KM6VV wrote:
> > > >
> > > > Hi Norm,
> > > >
> > > > Right here! Name's Alan. 440.85 Mhz, pl...
> > > >
> > > > Actually, I might add, I didn't BUILD the router, I just posted the
pix,
> > > > and studied the plans! It's built using ball bearing drawer slides,
> > > > 1/4"-20 threaded rod (as I recall), and small steppers. Dan wrote
the
> > > > article, but doesn't have a reprint, and as you know, Nuts & Volts
owns
> > > > it. I'd put out a call for Milton; "CQ CQ CQ Milton..." ;>)
> > > >
> > > > Seriously I'd contact Milton. Milton are you still listening? Or,
> > > > email me off list and I'll provide whatever info I can (for any and
> > > > all).
> > > >
> > > > You might also look at:
> > > >
> > > > http://hometown.aol.com/drigotti/HobbyCNC.htm
> > > >
> > > > Dave has an extensive set of router plans. Uses Kirk Motion parts.
> > > > Obviously more expensive! But depending what you are looking for...
> > > >
> > > > HTH
> > > >
> > > > Alan KM6VV
> > >
> > > Nuts and Volts may sell reprints. Milton arranged for me to see a
copy
> > > of Dan's article. I posted Milton's pix for him.
> > >
> > > Your router project seems to be doing fine! Perhaps YOU could post
> > > plans for those interested.
> > >
> > > Alan KM6VV
> > >
> > >
> > > > Hello I posted pictures of my new toy I have been working on now for
> > > > sometime. Still not done have alot to do to it. Its in the photo
> > > > section under WOODKNACK. I saw some photos under the file section of
> > > > a modified Dan Mauch's machine. I tried to get ahold of the guy to
> > > > find out where I could get the plans, but had no luck. So I built it
> > > > with the photos he had in the file section. Just kind of wung it!
> > > > Did'nt come out to bad I think. Like I said still need to do alot
> > > > more to it. Total cost so far is around $300 dollars with everything
> > > > you see in the photos. Still need to buy a trim router for it..
> > >
> > >
> > > Addresses:
> > > FAQ: http://www.ktmarketing.com/faq.html
> > > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> > >
> > > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > > Moderator: jmelson@... timg@... [Moderator]
> > > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > > bill,
> > > List Manager
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> > Addresses:
> > FAQ: http://www.ktmarketing.com/faq.html
> > FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
> >
> > Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> > Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> > Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> > List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> > Moderator: jmelson@... timg@... [Moderator]
> > URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> > bill,
> > List Manager
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
http://docs.yahoo.com/info/terms/
>
>
> Addresses:
> FAQ: http://www.ktmarketing.com/faq.html
> FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/
>
> Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
> Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
> Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
> List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
> Moderator: jmelson@... timg@... [Moderator]
> URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
> bill,
> List Manager
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>