Re: [CAD_CAM_EDM_DRO] Fresh run at homebrew DRO
Posted by
ppump11578@a...
on 2002-01-08 12:31:40 UTC
Please I too at this time use the very simple Vernier approach to the problem
and would welcome any info on the output from them to a readout box. It seem
to vary from that fitted onto the specially made scales what looks like only
two contacts as opposed to four on the scale. If possible please include in
for the info, thanks
Fiddlephil
Phil Pumphrey
ppump11578@...
and would welcome any info on the output from them to a readout box. It seem
to vary from that fitted onto the specially made scales what looks like only
two contacts as opposed to four on the scale. If possible please include in
for the info, thanks
Fiddlephil
Phil Pumphrey
ppump11578@...
Discussion Thread
jmarkwolf
2002-01-07 18:13:17 UTC
Fresh run at homebrew DRO
ccs@m...
2002-01-07 18:20:03 UTC
Re: [CAD_CAM_EDM_DRO] Fresh run at homebrew DRO
James Stevens
2002-01-08 08:32:44 UTC
Re: [CAD_CAM_EDM_DRO] Fresh run at homebrew DRO
Scot Rogers
2002-01-08 09:17:42 UTC
test
J. Mark Wolf
2002-01-08 10:42:02 UTC
Re: [CAD_CAM_EDM_DRO] Fresh run at homebrew DRO
ppump11578@a...
2002-01-08 12:31:40 UTC
Re: [CAD_CAM_EDM_DRO] Fresh run at homebrew DRO
J. Mark Wolf
2002-01-12 18:59:11 UTC
Re: Fresh run at homebrew DRO
Doug Fortune
2002-01-12 19:32:43 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
Dr.D
2002-01-12 20:12:03 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
J. Mark Wolf
2002-01-13 06:29:10 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
James Stevens
2002-01-14 08:45:23 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
J. Mark Wolf
2002-01-14 16:24:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
James Stevens
2002-01-15 09:01:44 UTC
Re: [CAD_CAM_EDM_DRO] Re: Fresh run at homebrew DRO
J. Mark Wolf
2002-01-23 09:54:32 UTC
Re:Fresh run at homebrew DRO