Re: Router design
Posted by
cncdxf
on 2002-01-12 16:24:45 UTC
Hi Smoke,
It looks like John's Pipe Dream. Have you seen his
7th Sojourn?
www.kleinbauer.com/
Bob
It looks like John's Pipe Dream. Have you seen his
7th Sojourn?
www.kleinbauer.com/
Bob
--- In CAD_CAM_EDM_DRO@y..., "smoke2k01" <smoke@t...> wrote:
> I've just posted a rough router design saved in .jpg format for
> building their CNC routers. This drawing only shows a cross
section
> thru the frame. Z axis construction is NOT shown, but can easily
be
> incorporated.
>
> It is suitable for any size table. Guide bars are used on all 3
axis.
> The red cross hatch areas are guide bar supports and the blue areas
> represent Thompson ball bushings.
>
> This unit is designed to be loaded from one end. Any frames or
> brackets made to support the screw drive motors would need to leave
a
> slot above the table for loading.
>
> All wiring and controls would be contained out of the way on or
near
> the top of the machine.
Discussion Thread
Brian Fairey
1999-05-12 13:33:40 UTC
Router design
Brian Fairey
1999-05-12 13:50:46 UTC
Re: Router design
smoke2k01
2002-01-12 14:41:55 UTC
Router design
cncdxf
2002-01-12 16:24:45 UTC
Re: Router design
Smoke
2002-01-12 17:05:15 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router design
aspaguy
2002-01-13 18:01:26 UTC
Re: Router design
Smoke
2002-01-13 18:24:40 UTC
Re: [CAD_CAM_EDM_DRO] Re: Router design
aspaguy
2002-01-13 19:06:12 UTC
Re: Router design