RE: [CAD_CAM_EDM_DRO] How many inch/oz for a rotary axis?

Roger,
MaxNC use both 70 and 140 in/oz motors on their 4th axis, depending on
whether it is supplied for the Max-10 or -15 models... the rotary table they
use is the Sherline unit...

Bryan

-----Original Message-----
From: vrsculptor [mailto:vrsculptor@...]
Sent: Wednesday, 23 January, 2002 9:37 AM
To: CAD_CAM_EDM_DRO@yahoogroups.com
Subject: [CAD_CAM_EDM_DRO] How many inch/oz for a rotary axis?


Gentlemen,
Any sugestion on how many inch/oz you need on a 4th axis rotary axis
for milling? The rotary table has a 40:1 worm reduction so I wouldn't
think you would need much. I was looking at using one of the smaller
pitman servos with a Gecko 320.

Roger


Addresses:
FAQ: http://www.ktmarketing.com/faq.html
FILES: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO/files/

Post messages: CAD_CAM_EDM_DRO@yahoogroups.com
Subscribe: CAD_CAM_EDM_DRO-subscribe@yahoogroups.com
Unsubscribe: CAD_CAM_EDM_DRO-unsubscribe@yahoogroups.com
List owner: CAD_CAM_EDM_DRO-owner@yahoogroups.com, wanliker@...
Moderator: jmelson@... timg@... [Moderator]
URL to this page: http://groups.yahoo.com/group/CAD_CAM_EDM_DRO
bill,
List Manager



Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/