Re: [CAD_CAM_EDM_DRO] Re: temperamental G's

In a message dated 1/31/2002 12:14:06 PM Mountain Standard Time,
bob@... writes:

> At initial power up time, the disable
> line would be set to ground until I activate the contactor (one contact is
> used for a latch) Then the disable line will be open.
>

At least the G-320 has to have this line tied high for 5 seconcds to reset,
then the high is removed. A low switches it to error, floating might be
anywhere.
bill


[Non-text portions of this message have been removed]